Winegard MVT-35B Manual download pdf (Page 65)

P a g e |

8.3 - Maintenance Procedures

The Maintenance Procedures described below should be performed by trained service

technicians. If at any time the procedure becomes unclear or you feel continuing on with

a procedure could cause damage or corrupt the system software or mechanics, please

stop and seek assistance from Winegard Technical Support at either

8.3.1 - IDU Software Update

The following procedure describe the methods which can be implemented to perform a

Software Update.

All software updates require that the version you want to load onto the controller is

unzipped and copied to a USB drive.

Winegard publishes current copies of the software on it’s support web site located at

http://www.satellitesupport.net

An account is required to log into the site and download software and other related

documents, manuals and white papers.

If an account is required, please go to the support site and request an account or contact

support at 877-704-1112

1 – GUI “UPDATE” Screen

The “UPDATE NOW” button can be found on the Winegard controller’s “Update”

screen of the Advanced User Data section of the pointing software.

This process automatically updates the software on the ODU.

The following files must be located in the root directory of the USB memory device

used for the update in order for the process to work properly using the “Update Now”

button:

bootdcmb.hex

dcmb.bin

DT740.exe

DT740.tmp

Launcher.exe

Launcher.tmp

trk_app.bin

update.xml

Procedure:

1. Turn on the controller.

2. When the “Main Menu” screen is displayed, insert the USB drive into one of the

USB ports on the back of the controller.

3. Press the “Wrench” button on the controller’s main menu screen and navigate

through the user status screens until the “Update” screen is displayed.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 85 86

No comments

Winegard MVT-35B Manual Page 65