Winegard MVT-35B Manual download pdf (Page 24)

P a g e |

6.2 - Rear Panel Connections

1. Ethernet Ports -

The controller features a 3 port 10/100 switch.

2. Mini USB Port -

The USB Mini Port is a client port utilized at the factory.

3. USB Host Port -

Available to connect USB devices such as a Keyboard or Mouse.

4. Serial RS232 Output Port -

The Serial port is used for engineering debugging purposes only.

5. ODU Power/Communication Cable (ODU) -

The Control Cable port is either a TNC or F (male) connector. F connector shown.

6. AC Power Plug -

The system is supplied with a UL listed 120VAC power cord. See section 4.7 for

power cord specifications. The power cord must be connected to a grounded

socket-outlet protected by a 20 amp fuse or circuit breaker. The power cord is the

disconnecting device. The socket-outlet for the power cord shall be installed near

the equipment and be easily accessible. If the IDU is installed in a rack

accessibility must be provided to the power cord or to the fuse or circuit breaker

for disconnection.

7. Remote -

Connection for a remote status indicator.

8. Fuse -

5A 32V Fast Acting Type ATF

Winegard P/N 2320020

9. Model/Serial Number Label

This label contains the model number a serial number of the IDU.

This label contains logos for all agency certifications.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 85 86

No comments

Winegard MVT-35B Manual Page 24