Winegard RD-4600 User Manual download pdf (Page 6)

STEP 2. Move rotation clamp to the LOCK position.

STEP 3. Turn directional dial (see Figure 5) until the arrow is pointing North.

STEP 4. Unsnap elevation crank and turn (clockwise) in direction of "UP" arrow, about

14 - 15 turns or until some resistance is met.

STEP 5. Turn receiver ON, and access installation menus to determine antenna elevation

and direction/heading.

STEP 6. Move rotation clamp to the ROTATE position. Turn directional handle until pointer

on directional handle is pointing in direction indicated by the receiver. Example: If receiver

says point antenna at 145° then rotate directional handle so that pointer is pointing at 145°

on the directional dial.

STEP 7. Refer to table below and turn elevation crank

counter clockwise (CCW) the number of turns indicated to

get the elevation shown by the receiver. One full turn

equals approximately 7° of elevation change.

OPERATION

STEP 1. Using a compass, determine which direction is North. It is recommended that

you step outside to perform this step. Standing in or near coach/RV can give you an

incorrect reading. The more accurately you determine North, the easier it will be to find the

satellite(s).

FIGURE 5

Directional Dial

Elevating Crank

Directional Handle

Pointer

Rotation Clamp

Directional

Handle

ELEVATION TURNS CCW

14 - 16

NONE

17 - 19

1/2

20 - 22

23 - 26

1-1/2

27 - 29

30 - 32

2-1/2

33 - 36

37 - 39

3-1/2

40 - 43

44 - 46

4-1/2

47 - 50

51 - 53

5-1/2

54 - 57

58 - 60

6-1/2

61 - 64

65 - 67

7-1/2

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Winegard RD-4600 User Manual Page 6

Comments to this Manuals