Winegard RD-4600 User Manual download pdf (Page 3)

ROOF ELEVATING SHAFT W/RW-1000 DIRECTIONAL

THICKNESS LENGTH HANDLE LENGTH

4 3/4" 6 1/4" RP-4200 req. 5 3/8"

4 1/2" 6" RP-4200 req. 5"

4 1/4" 5 3/4" 6 1/4" 4 3/4"

4" 5 1/2" 6" 4 1/2"

3 3/4" 5 1/4" 5 3/4" 4 1/4"

3 1/2" 5" 5 1/2" 4"

3 1/4" 4 3/4" 5 1/4" 3 9/16"

3" 4 1/2" 5" 3 3/8"

2 3/4" 4 1/4" 4 3/4" 3 1/16"

2 1/2" 4" 4 1/2" 2 3/4"

2 1/4" 3 3/4" 4 1/4" 2 3/8"

2" 3 1/2" 4" 2 1/16"

1 3/4" 3 1/4" 3 3/4" 1 3/4"

1 1/2" 3" 3 1/2" 1 3/8"

1 1/4" 2 3/4" 3" 1"

Directional

Handle

FIGURE 2

NOTE: Make sure that coax cable

fits between the reflector and the

fixed feed arm.

(4) 5/16-18

Hex Nut

(4) 5/16"

Flat Washer

(4) 5/16-18 x 5/8"

Flat Head Bolt

Rev. 6/05/01

STEP 4. Attach reflector to backup

assembly as shown in Figure 2.

The mount is designed to fit roofs 1" to 4 3/4" thick. If roof is less than 4 3/4" thick, cut elevating shft and directional

handle to size. (See table below.) If roof is more than 4 3/4" thick, contact Winegard Company.

CAUTION: IF YOU ARE USING THE RW-1000 ROOF WEDGE, ADD 1/2" TO ELEVATING SHAFT LENGTH

GIVEN BELOW, BUT NOT TO THE DIRECTIONAL HANDLE.

1 2 3 4 5 6 7 8 ... 15 16

No comments

Winegard RD-4600 User Manual Page 3