Winegard TRAVELNET TN2300-DV Setup Guide

Browse online or download Setup Guide for Networking Winegard TRAVELNET TN2300-DV. Winegard TRAVELNET TN2300-DV Setup guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Ver. 1.6
8/3/2009 - 1 -
TravelNet Data/Voice Cellular Router Phone Setup Guide
Direct Connection: Phone
Connect a phone to your TN2300-DV SERIES’ phone (RJ11) jacks using a
standard telephone cord-
Figure 1
Connection via Wall Jacks
If you do not have local phone service, you may use your TN2300-DV
SERIES to provide a connection to your wireless service for devices that are
plugged into your wall jacks.
1. Connect either of your TN2300-DV SERIES’ phone (RJ11) jacks to any
wall jack using a standard telephone cord -
Page view 0
1 2 3 4 5 6 ... 10 11

Summary of Contents

Page 1 - Figure 1

Ver. 1.6 8/3/2009 - 1 - TravelNet Data/Voice Cellular Router Phone Setup Guide Direct Connection: Phone Connect a phone to your TN2300-DV SERIES’

Page 2

Ver. 1.6 8/3/2009 - 10 - To set *86 as the default voicemail number: • From Configuration Mode, press . To set #86 as the default voicemail number:

Page 3

Ver. 1.6 8/3/2009 - 11 - Using a Fax Machine With Your TN2305-DV (Verizon Only) Your TN2305-DV supports sending and receiving faxes with a fax mach

Page 4

Ver. 1.6 8/3/2009 - 2 - Important DO NOT CONNECT YOUR TN2300-DV SERIES TO A WALL JACK IF YOU HAVE OUTSIDE SERVICE (I.E., A DIAL TONE) AT YOUR WALL

Page 5

Ver. 1.6 8/3/2009 - 3 - 2. Listen for a dial tone. (If you hear a No Service tone [fast beeping], hang up and try again. If the No Service tone cont

Page 6

Ver. 1.6 8/3/2009 - 4 - 1. Dial your phone number. 2. Follow the voice prompts to retrieve your messages. Clearing Your Voicemail Indicator • The m

Page 7

Ver. 1.6 8/3/2009 - 5 - Many device configuration settings require you to enter Configuration Mode – the device’s programming mode – before you may

Page 8

Ver. 1.6 8/3/2009 - 6 - If using and does not provide satisfactory volume options for you (see “Volume Level” on page 12), you may adjust your pho

Page 9

Ver. 1.6 8/3/2009 - 7 - • From Configuration Mode, press <lock code> . To disable Call Barring (default setting): • From Configuration Mode,

Page 10

Ver. 1.6 8/3/2009 - 8 - To disable Dial Tone After Remote Disconnect: • From Configuration Mode, press . Note: If Dial Tone After Remote Disconnect

Page 11

Ver. 1.6 8/3/2009 - 9 - To set your phone’s TTY mode: • From Configuration Mode, press <0 or 3> , where <0 or 3> are as follows: 0 = T

Comments to this Manuals

No comments