Winegard SK-3003 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Guide for using DIRECTV SWM Technology with Winegard Mobile Satellite TV Antennas Guide for using DIRECTV SWM Technology with Winegard Mobile Satellite TV Antennas
Wiring Version 1
All three ports of the SK-3003 TRAV’LER antenna must be connected as shown to
three inputs on the SWM8 for access to 101° odd and even transponders, 119° odd
transponder only programming.
Even (18V) transponders will not be available in Wiring Version 1.
This will be verified in the receiver installation status screen shown to the right.
If connecting to a DVR receiver, do not connect a coaxial cable to the Satellite 2
input. With SWM, only connect to the Satellite 1 port (labeled FTM or SWM).
≤40 ft between antenna & SWM8
Terminate unused
splitter outputs
with a 75 ohm
termination cap.
Non-DVR Receiver
DVR Receiver
Terminate unused
SWM outputs with a 75
ohm termination cap.
Wiring Version 2
All three ports of the SK-3003 TRAV’LER antenna must be connected as shown to
three inputs on the SWM8 for access to 101° odd and even transponders, 110° and
119° even transponder programming.
Odd (13V) transponders will not be available in Wiring Version 2.
This will be verified in the receiver installation status screen shown to the right.
If connecting to a DVR receiver, do not connect a coaxial cable to the Satellite 2
input. With SWM, only connect to the Satellite 1 port (labeled FTM or SWM).
≤40 ft between antenna & SWM8
Terminate unused
splitter outputs
with a 75 ohm
termination cap.
Non-DVR Receiver
DVR Receiver
Terminate unused
SWM outputs with a 75
ohm termination cap.
KEY
Coaxial Cable
Power Cable
(attached to power inserter)
109
SK-3003 TRAV’LER Antenna with DIRECTV SWM8 SK-3003 TRAV’LER Antenna with DIRECTV SWM8
KEY
Coaxial Cable
Power Cable
(attached to power inserter)
Page view 5
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments